Key Specifications/Special Features:
The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, high precision digital multimeter, LED lamp and more.
● Video signal testing
● Video monitor tester, high-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.
● PTZ controller
Video monitor tester built-in Pelco-D/P PTZ control protocol, through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size.
● Image generator
Multi-format video out port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section
● DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
● Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
● Enhanced network cable testing
By UTP cable test port on the meter, you can test the connection of network cable.
● VGA/HDMI input
Supports VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution 1920X1080
● TVI camera test (Optional) *
HD TVI video surveillance testing, support 720p 25, 30, 50,60fps/1080p 25,30fps. When TVI signal input, the tester will display HD TVI camera image.
● AHD camera test (Optional) *
HD video surveillance testing, support AHD 2.0 version, 720p 25,30fps/1080p 25,30fps. When AHD signal input, the tester will display the AHD camera image.
● High precision digital multimeter (Optional) *
The tester built in high reliability digital multimeter with a stable performance, clear reading, can be used to measure DC voltage, AC voltage, DC current, AC current measurement accuracy, easy to use.
● LED lamp
It is useful for the engineer to install and maintain security system at night. LED on/off pressing button, easy to operate.
● The battery graphic display
The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.