Key Specifications/Special Features:

• These specifications are applied to ceramic trimmer capacitors with ceramic dielectric, which are used for the electronic apparatus and communication equipments
• Rated voltage: 100V DC
• Temperature range: -25 to +85 degrees Celsius
• Test circumstance: the standard test circumstance is at 25 degree Celsius and humidity 65 percent, it may be within at 5 deg C and humidity 45% to 85%
• Quality factor: when measured at 20 degree Celsius, 0.5 to 5V and 1MHz +/- 10%, the Q values are given in the attached specifications
• Insulation resistance: when applied 100V DC between terminals for 1 minute at the maximum capacitance, the insulation reistance shall be more than 100,000M ohms
• Withstand voltage: there is no abnormality after applying 220V DC (less than 5mA) for 5 seconds between the terminals
• Strength of terminals: when power is applied to the terminals slowly and kept at 0.5kg for 10 seconds,the terminals shall not loosen or be broken mechanically
• Torque: the range of the minimum and the maximum torques necessary for starting the first tune and at least for one round tuning is 35 to 200g per cm
• Solderability: when the terminals are dipped into the soldering pot at 250 + / - 5 degrees Celsius for 5 +/- 0.5 seconds, more than three fourth of the total dipped surface is covered with the new solder

Delivery Details:

Product Certifications:

Harmonization System (HS) Code:

• 85334000