Key Specifications/Special Features:

• Standard atmospheric conidtion:
  • Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests is as followings:
    • Ambient temperature: 5 to 35 degrees Celsius
    • Relatvie humidity: 45 to 85%
    • Air pressure: 86 to 106kPa
  • Operating temperature range: - 25 to 70 degrees Celsius
  • Humidity range: 85% RH maximum
• Electrical characteristics:
  • Rated voltage/rated current:
    • Spec: AC 100V 1A or DC 12V 2A maximum
  • Dielectric strength:
    • Condition: between conductors which should not make contact under normal conditons. 250V AC rms(50 to 60Hz) for 1 min (trip current 2mA)
    • Spec: without breakdown
    Insulation resistance:
    • Conditons: voltage of 250V DC shall be applied for a minute. Between conductors which should not make contact under normal conditons after which measurement shall be made
  • Spec: 50M Ohm min
• Contact resistance:
  • Conditions: measurement shall be made at 1000Hz with small current: 50mA
  • Spec:
    • Pin-contact: 30m Ohm maximum
    • Plug cover-socket: 50mA maximum
• Mechanical characteristics:
  • Operating force:
    • Conditions:
      • Insertion force:
        • Spec: 44.1N (4.5kgf) maximum
      • Withdrawal force:
        • Spec: 4.9 to 29.4N (0.5 to 3kgf)
    • Contact pull strength:
      • Conditions: contact shall withstand a steady strenght pull of 2kg in the direction of contact breakout for 20 second
      • Spec: without parting
    • Single tenacity:
      • Specifications: 0.098N (10g) minimum