Key Specifications/Special Features:

• Insulation resistance of adjacent opened terminals shall not be less than 50M Ohms when measured with 500V resistance meter
• Connector shall withstand 500V (RMS) between adjacent opened terminal for one minute
• Contact resistance of normally closed terminals shall not exceed 0.03 ohm when measured at 1A current by voltage drop method
• After exposed at temperature of 40 +/- 2 degrees Celsius, insulation resistance shall not be less than 30M Ohms
• At relative humidity of 90 to 95% for 48 hours, insulation resistance shall not be less than 30M Ohms
• Dried at room temperature for 30 minutes, insulation resistance shall not be less than 30M Ohms
• Connector shall withstand 5,000 cycles of insertions and withdrawal with testing plug contact resistance shall not exceed 0.1 Ohms
• A wide range of A/V connectors available
• Materials:
  • Housing: thermoplastic
  • Contacts: copper alloy covered with plating