Key Specifications/Special Features:

• Standard atmospheric condition
  • Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests are as follows:
    • Ambient temperature: 5 to 35 degrees Celsius
    • Relative humidity: 45% to 85%
    • Air pressure: 85 to 106kPa
    • If there is any doubt about the results, measurements shall be made within the following limits
      • Ambient temperature: 20 ±1 degrees Celsius
      • Relative humidity: 60% to 70%
      • Air pressure: 86 to 106kPa
    • Operating temperature: -25 to 60 degrees Celsius
    • Humidity range: 85% RH maximum
  • Electrical characteristics:
    • Rated voltage/rated current: 34V DC 2A
    • Insulation resistance: 100M Ohms minimum
    • Contact resistance: 30M Ohms max
  • Mechanical characteristics:
    • Operating force:
      • Insertion force: 29.4N (3kgf)
      • Withdrawal force: 0.98 to 29.4N maximum (0.1 to 3.0kgf)
    • Terminal strength/loosen strength of contact/strength of tapping part: without cracks or excessive looseness to the terminal, but deformation of terminal is authorized Characteristics shall be satisfied