Key Specifications/Special Features:

• 11mm snap-in, insulated shaft potentiometers (11P1HBF-B / 11P1VBF-D)
• Mechanical characteristics:
  • Application: 11mm, single-unit
  • Total resistance angle: 300 degrees +/-5 degrees
  • Rotational torque: 30-200gf-cm
  • Rotational stopper strength: without bushing 5 kgf.cm; with bushing 6 kgf.cm
  • Push pull strength: 8 kgf max
  • Shaft inclination measured at the tip of the shaft: within 0.35mm
  • Shaft wobble: without bushing 0.7 x L/20mm p-p max; with bushing 0.7 x L/30mm p-p max
  • Bushing nut tighting strength: 10 kgf.cm max
• Electrical characteristics:
  • Application: 11mm, single-unit
  • Total resistance angle: 5k ohms to 500k ohms
  • Total resistance tolerance: +/-20%
  • Resistance taper: A, B, C, D, E, K, W
  • Rated power: 0.05W
  • Dual unit: 0.03W
  • Max operation voltage: 50VAC/20VDC
  • Insulation resistance: 100M ohms min at 500VDC
  • Withstand voltage: for one minute or more at 500VAC
• Durability
  • Rotational life: 15,000 cycles
• For more information, visit our websiteor or contact our head office