Key Specifications/Special Features:

• Performance (at initial value):
  • Insulation grade: Class E (120 degree Celsius)
  • Lead wire: Class A (105 degree Celsius)
  • Temperature rise: 80 degree Celsius (at continuous duty, ambient temperature 40 degree Celsius with heat sink)
  • Insulation resistance: more than 100MΩ on a 500V DC megger (at normal temperature and normal humidity)
  • Dielectric strength: 1,000V AC, 50/60Hz, 1 minute (at normal temperature and normal humidity)
  • Operating temp range: -20 to 40 degree Celsius
  • Life expectancy:Standard life: 2,000,000 cycles or more
• Design and features: Push-pull solenoid design utilizes a coil with the maximum amount of magnet wire in the smallest amount of space. This coil assembly is packed in a metal housing using highly permeable steel in order to obtain maximum force and minimum size and weight. The plunger design utilizes a assistance magnetic circuit, which provides an increased output of force of 20 to 50%. In general, the shaft is attached to the plunger and load can be connected to either end of the shaft. Therefore, attaching to the shaft on the stopper side actuates as a push solenoid. Attaching to the shaft on the plunger side actuates as a pull solenoid.