Electric vehicle charging is continually being improved to enable faster and more efficient recharging that will encourage wider adoption of this transformative green technology.
In China, which has the world’s largest number of EVs on the road, manufacturers of charging stations are developing units with higher power and capability to deliver at faster speeds. They are aiming to exceed the 250kW threshold at which a typical EV can replenish up to 80 percent of power within 30 minutes.
Top EV maker BYD made a breakthrough in early 2025, realizing up to 1,000V charging voltage, 1,000A current and 1MW power. This technology can ensure a range of 400km within 5 minutes of charging. The company has announced that it will install 20,000 such stations throughout the country in the next one or two years.
Commonly available EV charging stations include DC and AC types that are compliant with UL, CE, PSE, FCC, CCC and RoHS requirements.
Typical DC units are in the 200 to 1,000VDC range, with up to 500A rated current and 30 to 640kW rated power, while AC counterparts have 220 or 380VAC, 16 to 63A and 3.7 to 22kW. Both types have built-in protection from over- and undervoltage, overcurrent, -temperature, short circuits, current leakage and lightning. Based on water resistance, there are IP54 to IP68-rated options.
These products are usually made using charging and LCD modules, relays, meters, plugs and cases sourced from domestic providers. Intense competition has been keeping EV charging station prices stable.
EV charging station, 80, 120 or 160kW maximum power
Company: Dongguan Tonstep Electronics Technology Co. Ltd
The DC-80kW/120kW/160kW from Dongguan Tonstep has 380VAC±20 percent, 50/60Hz input and 200 to 1,000VDC output voltage range, 80, 120 or 160A rated current and 80, 120 or 160kW maximum power. The dielectric strength is ≥2,000V, noise level over 75dB and operating temperature -20 to 50 C. This IP54 unit for ground mounting has over- and undervoltage, short-circuit, overload, leakage and surge protection.
MOQ: 10 units
Lead time: 25 days
EV charging station delivering up to 22kW power
Company: Dongguan Tonstep Electronics Technology Co. Ltd
This 380VAC±20 percent, 50/60Hz EV charging station from Dongguan Tonstep, model AC-11kW/22kW Metal Post, delivers 380VAC±20 percent output voltage, 32A rated current and 22kW maximum power. This IP54 unit has ≥2,000V dielectric strength, -20 to 50 C operating temperature and undervoltage, short-circuit, overload, leakage and surge protection.
MOQ: 10 units
Lead time: 25 days
EV charging station with 11kW power
Company: Regital New Energy Resources Technology Ltd
Regital’s model EE-ACH101-11-2EX-11 is a 304 to 456V EV charging station with 16A rated current, 380V, 11kW output and -20 to 50 C operating temperature. It has built-in over- and undervoltage, overcurrent and -temperature, current leakage, grounding, short-circuit and lightning protection. This IP65 unit meets EN/IEC 61851-1, EN/IEC 61851-21-2, EN 62196, CE and UKCA standards.
MOQ: 1 unit
Lead time: 7 days
EV charging station providing 44kW rated power
Company: Regital New Energy Resources Technology Ltd
The EE-ACH101-44-2A2-02 EV charging station from Regital has 380V rated voltage, 32Ax2 rated current and 44kW rated power. Its operating temperature is -25 to 50 C. This unit has over- and undervoltage, overcurrent and -temperature, leakage, grounding, short-circuit and lightning protection. It complies with IEC/EN 62752, CE and UKCA requirements.
MOQ: 1 unit
Lead time: 30 days
EV charging station, 11kW capacity
Company: Shenzhen MiQi Electronic Co. Ltd
Shenzhen MiQi’s M11 is an EV charging station with 11kW charging capacity. It has a rated current adjustable to 8, 10, 12, 14 or 16A, rated voltage of 400VAC or three phase, frequency of 50/60Hz, withstand voltage of 3,000V and standby power of less than 3W. This IP65 wall- or pole-mount model has -30 to 55 C operating temperature and protection from overvoltage, -load, -temperature, undervoltage, earth leakage, lightning and short-circuit conditions. It meets CE and RoHS.
MOQ: 1 unit
Lead time: 15 days
22kW EV charging station
Company: Shenzhen MiQi Electronic Co. Ltd
An EV charging station, Shenzhen MiQi’s Q22 has a rated current adjustable to 8, 12, 16, 20, 24, 28 or 32A, rated voltage of 400VAC or three phase, frequency of 50/60Hz, withstand voltage of 3,000V and standby power of under 3W. Its charging capacity is 22kW. This IP65 unit, for wall or pole mounting, has built-in overvoltage, -load, -temperature, undervoltage, earth leakage, lightning and short-circuit protection and -30 to 55 C operating temperature. It meets CE and RoHS standards.
MOQ: 1 unit
Lead time: 15 days
