Many models deliver 1.3 or 2MP. IR LEDs and CMOS sensors are close to standard, providing up to 30m illumination and consuming little power, respectively.

HDCVI

Sectec Co. Ltd
Sectec’s model ST-HC765-1.3M vandal-resistant IR camera adopts HDCVI for long-distance real-time transmission of video signals. It has a 2.8-to-12mm varifocal lens, 36 IR LEDs and built-in IR-cut. IR range is 30m. Resolution is 1280 pixels at 25fps. The IR camera comes in white and measures 100x120mm. Sectec accepts OEM and ODM orders.

Sony Super HAD CCD II sensor

Shenzhen ANA Electronics Technology Co. Ltd
The ANA-VI2365BJ model from Shenzhen ANA is fitted with a 1/3in Sony Super HAD CCD II sensor and 24 high-efficiency low-loss IR LEDs. Projection distance is 45 to 75ft. Image sensor resolution is 550TVL. The vandal-resistant IR camera is also protected against water, lightning and dust. It is rated IP67. The housing is made of aluminum alloy for good heat dissipation. The camera has day/night modes and switches from colored to B/W.

Analog HD

Shenzhen Anyuan Technology Co. Ltd
The AY-DOIR21AHD model from Shenzhen Anyuan takes analog HD videos with an effective resolution of 1280x960 pixels. Low illumination is 0.05lux at F1.2 with the AGC on. The vandal-resistant IR camera is fitted with a 2.8-to-12mm manual lens and has a shutter speed of 1/3 to 1/100,000s. The PAL/NTSC unit has a 1/3in 1.3MP Aptina CMOS sensor with a 960-pixel resolution. Transmission range via a 75-3 coaxial cable is more than 500m.

Aptina CMOS sensor

Shenzhen Anyuan Technology Co. Ltd
Shenzhen Anyuan’s AY-DXIR21AHD model adopts a 1/3in 1.3MP Aptina CMOS sensor to take analog HD videos. Transmission distance via a 75-3 coaxial table exceeds 500m. The PAL/NTSC vandal-resistant IR camera needs 0.05lux at F1.2 with the AGC on. It has a 2.8-to-12mm manual lens. Effective resolution is 1280x960 pixels. The unit adopts 3DNR. It has 18 IR LEDs and an IR distance of 15m.

Day/night functionality

Shenzhen Jinyangda Electronic Co. Ltd
Shenzhen Jinyangda’s JYD-824V model has day and night functionality, adopting 30 LEDs to illuminate up to 30m in the dark. The vandal-resistant IR camera uses a 1/25in 2MP Sony MX122 CMOS sensor and a Hisilicon Hi3516C chipset. It supports dual-stream encoding and H.264 compression. The model is fitted with a 2.8-to-12mm varifocal lens. TCP, UDP, IP, HTTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, IPsec, UPnP, RTP and RTCP are supported.

Black IR LEDs

Snov International Co. Ltd
Snov’s model SV-AD701-W3B vandal-resistant IR camera adopts 36 black IR LEDs with an illumination range of 30m. It is fitted with a Sony Super HAD II CCD sensor with DSP. Sensor resolutions are 600, 650 and 700TVL. On day mode, low illumination is 0.3lux at F1.2, 50IRE and the AGC on. Using IR LEDs, minimum illumination is 0lux. IR-cut filter and flush mounting are optional for the IP68-rated model.

Mobile surveillance supported

Surway Technology Co. Ltd
Suway’s model IPC-918 Series vandal-resistant IR camera works with iOS-, Windows Mobile- and Android-powered devices to allow mobile surveillance. The ONVIF 2.0-based unit delivers 720, 960 or 1080 pixels. At 1920x1080 pixels, the frame rate is 25fps at 50Hz and 30fps at 60Hz. The camera is fitted with 24 IR LEDs that reach 10m. Its metal housing comes in black, white, silver or purple.