Releases have up to 3,000rpm no-load speed and reach about 40,000 blows per minute. Drill diameter is between 10 and 30mm. Some models come with chuck keys, depth gauges and extra handles.

25mm maximum drill capacity

Ronix (Zhangjiagang Bonder Area) Co. Ltd
The model 2210 impact drill from Ronix has a drill capacity range of 1.5 to 25mm. It bores 13mm diameters in steel and 25mm in wood. The unit is rated at 810W, and is capable of variable speed and reverse rotation. It has a 360-degree rotary auxiliary handle and a 3m-long cable. The product weighs 2.4kg.

Cordless drill runs on Li-ion battery

Shanghai Xiaowei International Trading Co. Ltd
Shanghai Xiaowei’s model T2SR12-2LI cordless drill uses a 1.3Ah 3.6V Li-ion battery. Charging time is three to five hours. The unit has 1,150rpm no-load speed and 20Nm maximum torque. It is fitted with a 10mm chuck. The product is packed in a colored box. MOQ is 500 units.

13mm keyless chuck

Shenzhen China Dragon Ltd
Shenzhen China Dragon offers the PT-NEWHD01-13 model, which adopts a 13mm keyless chuck. It utilizes an 800W motor and runs on 230V at 50Hz. No-load speed reaches 2,800rpm. Impact frequency is 44,800 blows per minute. The model has a 2m-long cord. It is packed five units per 9.4x32.5x30cm colored box. MOQ is 500 units.

3,000rpm no-load speed

Tiankon Machinery & Electric Ltd
Tiankon’s TK0436 model delivers 3,000rpm maximum no-load speed. It requires 230V at 50Hz and is rated 750/800W. A 3mm chuck holds the drill bit. The product comes with a chuck key, depth gauge, an extra handle and an instruction manual. MOQ is 500 units.

Rated 430W

Yuanda Power Machinery Co. Ltd
The YD-FF02-10A model from Yuanda uses 430W input power. The impact drill supports 1,200rpm no-load speed. Drill diameter is 10mm in steel and 20mm in wood. The product weighs 2.2kg. MOQ is one container.

Up to 30,000 blows per minute

Zhejiang Yida Electrical Appliance Co. Ltd
Zhejiang Yida’s Z1 J-DBCR-16E model has an impact rate of 11,000 to 30,000 blows per minute. No-load speed can reach 1,100 or 3,000rpm. The 900/1,100W unit runs on 230 to 240V at 50Hz or 120V at 60Hz. The maximum drill diameters in steel, concrete and wood are 13, 16 and 30mm, respectively. The model allows forward and reverse rotation at variable speed. It can double as an electric hammer. The unit meets CE, GS and EMC standards.