Paintable original Front Wireless Parking Assist 16.5mm Flush Mount 4 Sensors GPS Speed Control Activated Below 15km/h LCD Display
Product Information
Key Specifications/ Special Features
Original 16.5mm Paintable Flush Mount Car Parking 4 Sensors Assist LCD display System For Front Bumper
4 * Ф16.5mm Front Sensors (cable lenth: 0.15meter+2.4meters) + Front ECU Controller (waterproof and high temperature resistant) + Colorful LCD display with build-in GPS module for Speed control, when speed below 15km/h, front sensor start to work (it's always working under 15km/h), with volume button for 0-8 levels volume adjustment, support mute.
Standby Current: 0.35mA
Detecting Distance: 0.30m-2.60m
Ultrasonic Frequency: 58KHz
Maximum power consumption: 2W
Operating Voltage: DC10-30V
working Ambient Temperature: -40°C ~ +80 °C
Our Wireless front parking sensor do not require cables to be run through the firewall, so the installation is much faster and easier with far less risk of grommet damage, the ECU is installed in the engine bay and the + & – power wires can be connected directly to the fuse box or the battery terminals, without looking for ACC, because the static current of the front controller is less than 0.35mA.
The dash mounted display features voltage, object, distance & direction, also features adjustable beeper volume.
And the farthest detection range we can reach 2.60 meters.





Original 16.5mm Paintable Flush Mount Car Parking 4 Sensors Assist LCD display System For Front Bumper
4 * Ф16.5mm Front Sensors (cable lenth: 0.15meter+2.4meters) + Front ECU Controller (waterproof and high temperature resistant) + Colorful LCD display with build-in GPS module for Speed control, when speed below 15km/h, front sensor start to work (it's always working under 15km/h), with volume button for 0-8 levels volume adjustment, support mute.
Standby Current: 0.35mA
Detecting Distance: 0.30m-2.60m
Ultrasonic Frequency: 58KHz
Maximum power consumption: 2W
Operating Voltage: DC10-30V
working Ambient Temperature: -40°C ~ +80 °C
Our Wireless front parking sensor do not require cables to be run through the firewall, so the installation is much faster and easier with far less risk of grommet damage, the ECU is installed in the engine bay and the + & – power wires can be connected directly to the fuse box or the battery terminals, without looking for ACC, because the static current of the front controller is less than 0.35mA.
The dash mounted display features voltage, object, distance & direction, also features adjustable beeper volume.
And the farthest detection range we can reach 2.60 meters.






,Distributor ,Exporter 
,Wholesaler ,Buying Office Show Attending
Global Sources Consumer Electronics
Global Sources Gaming

