Gallery View: Strength, low noise drive timing belt efficiency

The model MR984778 timing belt from Chongqing Bochi Machinery Import & Export Co. Ltd integrates 65 teeth. Width is 12.7mm. The belt uses Japan CR and HNBR as the main materials. Nylon 66 belt tooth surface elastic fabrics provide protection. The timing belt has a low noise level and is said to have a long service life. Kia, BYD, Chery, Hyundai, JAC, Jeep and Mitsubishi are included in the compatible vehicle brands.

Contact Supplier

Cixi Huixin Synchronous Belt Co. Ltd's model 105S8M25 timing belt has anti-cracking properties and is anti-aging, heat-, oil- and abrasion-resistant. Initial tension is small while transmission ratio is accurate and without slips. The belt can be made of CR and glass fiber skeleton materials from Japan. It adopts nylon 66 high spandex for the tooth surface. The 13028-19V00 variant fits Nissan Cefiro cars.

Contact Supplier

The Trantek Timing Belt model from Fujian Hua Min Group (Trantek Industries Co.) runs quietly and does not need lubrication. It is made of CR or HNBR and adopts fiberglass cords with high-tensile strength and flexibility. Its rubber teeth have heat and oil resistance, and good adhesion to the tensile member and tooth fabric. The wear-resistant nylon fabric boasts a low friction coefficient for long service life. The 95MR19, 201S8M30 and 117ZBS25 variants suit Suzuki, Mazda and Nissan vehicles, respectively. There are also models for other vehicles.

Contact Supplier

Jinyun Hasun Dintai Auto Parts Co. Ltd offers the model 127RU25.4 automotive timing belt that adopts neoprene or hydrogenated nitrile rubber, a glass fiber cord, nylon 66 belt tooth surface, and elastic fabrics from Japan. The product has 127 teeth and is 25.4mm-wide. It has constant length, high mechanical strength, low bearing load, noise and pretension, and is flexible, stable, abrasion- wear-, hydrolysis- and tropical climate-resistant. Post-elongation does not happen. The timing belt suits Buick Excelle 1.6 cars.

Contact Supplier

The model 163S8M27 timing belt from Jinyun Hasun Dintai Auto Parts Co. Ltd is also available in CR or HNBR, and with a glass fiber cord, nylon 66 belt tooth surface and elastic fabrics imported from Japan. Bearing load, noise and pre-tension are low. The flexible timing belt withstands wear-and-tear, and resists hydrolysis, tropical climate and post-elongation. The product incorporates 163 teeth. Width is 27mm. The belt can be used inToyota vehicles.

Contact Supplier

The Fortune Double-side Timing Belt model Shaanxi Fortune Industries Co. Ltd features a double-sided pitch synchronous belt and a tooth profile equivalent to a single tooth and tooth belt pitch. It comes in two types, the DA-duplex synchronous belt tooth in which the tooth has two symmetrical arrangements and the DB-duplex synchronous belt gear wherein there are two locations with staggered teeth.

Contact Supplier

Yangzhou Hengda Timing Belt Fty's Hengda Timing Belt model adopts CR for the belt. The glass fiber used for the skeleton materials is imported from Japan. The belt has 90 teeth and a tooth surface made of nylon 66 high spandex.